Autel MaxiIM IM508S Key Programming and Diagnostic Tool
Autel IM508S is a professional car key programmer and immobilizer that combines key programming, all systems diagnosis and advanced service functions. It could perform all keys lost, add key, key learning, remote control add, remote control learning, key chip read and write and other car related functions
Why Choose Autel MaxiIM IM508S?
- Advanced IMMO & Key Programming - Autel IM508S key fob programming tool can perform various IMMO functions like Read PIN/CS(All Key Lost), Key Generation, Key Learning, Remote Learning
- 2-Year Free Software Update
- Support Benz FEM/BDC Key Learning/ECU Adaptation,
- BMW CAS3/2 Key Learning,
- VW/Audi/Skoda/Seat IMMO III/IV/V Add Key, All Key Lost, IMMO ECU Reset/Adaptation/Refresh/Coding and programming functions Key Chip Read & Write, EEPROM Read & Write, Transponder Read & Write and basic MCU Read & Write.
- Cost-Effective Choice- If you only need to implement the basic add key or all key lost functions, MaxiIM IM508S can be implemented at a lower budget with full system diagnosis and with 36+ popular reset services.
- Widely Vehicle Coverage - Autel IM508S Diagnostic Scanner Tool comes with powerful OE-level diagnostics for more than 80 US, Asian and European makes and models.
- Hot Special Service Functions - Oil reset, EPB Service, SAS Calibration, DPF Regeneration, BMS and etc.
Autel MaxiIM IM508S Main Features
- Upgraded to Rockchip RK3566 /4*1.8GHz(A55)
- 7" 1024x600 LCD capacitive touchscreen
- 2 YEARS FREE UPDATES
- Internal reliable 64GB Memory,4G RAM
- Android Operating System 11 for fast boot-up and multitasking
- IM508S has the same IMMO functions and programming features with Autel IM608S II when connected to XP400 Pro key programmer
- Powerful combination of key programming/all system diagnostics/advanced maintenance services
- Smart Mode for guided and automated key learning
- Expert Mode for advanced key learning
- Read PIN/ CS (all key lost) ,key generation, key learning, remote learning
- IMMO ECU reset/ adaptation, refresh/ coding
- Transpronder read/write, EEPROM/ MCU read/write
- Powerful OE level diagnostics for more than 80 US, Asian and European makes and models
- Advanced maintenance services including EPB, DPF, SAS, Oil reset, BMS and TPMS sensor ID relearn
Autel MaxiIM IM508S Professional Key Programmer
Autel IM508S is a professional car diagnostic scanner that provides extraordinary service functions for the immobilizer system, including: immobilizer system status, key learning, key add, all keys lost, remote control learning, remote control add, chip read and write. It' s a professional solution for car keys and remote controls and prevents your car from being stolen!
- Smart Mode – accesses to a function menu where each function is configured as a smart guide system.
- Expert Mode – accesses to a function menu where each function is separated from each other.
- Read PIN / CS (All Key Lost)
- Key Generation
- Key Learning
- Remote Learning
- Backup / Restore IMMO Data
- IMMO ECU Reset / Adaptation
- IMMO ECU Refresh / Coding
- BMW FEM / BDC Key Learning and ECU Adaptation
- VW / AUDI MQB Key Learning, 48 Transponder (96-bit) Add Key, All Key Lost, A6 All Key Lost, and More
XP200 KEY&CHIP PROGRAMMER (included)
The XP200 is specially designed to read Volkswagen vehicle key chip data, clone and generate exclusive keys, read/write on-board EEPROM data, and read/write Freescale 9S12 MCUs. By working with diagnostic tool and PC that are both loaded with programmer software, the XP200 can read/write key chip data quickly and accurately.
1) Key Read / Write
2) EEPROM / MCU Read / WriteIMMO Extended Function Accs:APB112&G-BOX2
What Autel APB112(optional) Can Do for You?
- Smart key simulator
- Compatible with IM608(Pro), IM508, and MX808IM
- Compact but would need to be used with the XP400/XP400Pro
- 46, 4D data collection
- 46 smart key password calculation
- 46 chip simulation
- Toyota 4D (94/ D4, 98) smart key simulation
- Toyota H (88/ A8, A9, 39) smart key simulation
- Collects data from the ignition coil
- Identify ignition coil troubles
- Decode vehicle key chip data
- Simulate vehicle key chip (ex - 4D chip)
- Toyota/ Lexus smart key all key lost
- Chip decoding (Hyundai 46)
What G-BOX2(optional) Can Do For You?
- Supports Mercedes Benz All Key Lost, FASTER calculate password(The time to calculate the passwordwill bereduced from 20 hours to about 30 minutes)
- Used for Faster Mercedes ECU data and EIS password calculation
- Mercedes DAS3 can EIS/EZS all keys lost
- Reduces reading time of W204 ECU data & W207 EIS by over 85%
- No need to remove and reinsert the key for W221 & W164 after 2009 Models
OE-Level All Systems Diagnosis
Autel IM508S Car Scanner can perform OE-Level diagnosis on all car electronic systems like ABS, SRS, Engine, Transmission, show live data of multiple sensors and etc. It is compatible with more than 80 American, Asian and European makes and models.
- All Systems Diagnostics
- AutoVIN / AutoScan
- Read / Erase Codes
- View, Record, Playback Live Data
- View Freeze Frame Data
- Shop and Data Manager Applications
IM508S Most Commonly Used Reset Services
- Oil Rest Service: -This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.
- EPB Service -This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.
- SAS Service -Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. Therefore, the front wheels and the steering wheel must be set exactly to the straight-ahead position before calibration.
- TPMS Service -This function allows you to quickly look up the tire sensor IDs from the vehicle's ECU, as well as to perform TPMS replacement and sensor test.
- BMS Service -The BMS (Battery Management System) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
- DPF Service -This function is used to manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
-
Active Test: Used for outputting signal to vehicle control unit using the device to control actuator for test, so that it can test whether the actuator works normally, such as Fuel Pumps test, EGR test, etc.
-
Special Fuction:Refers to the initial adaptation, self-learning or some auto detection function with many procedures that the vehicle is performed after maintenance or reset is done or some related component in electronic control system is replaced, such as Crankshaft Position Sensor Learn.